Are Bulkhead Lights Approved for Use in Wet Areas?
When it comes to Bulkhead Lights for any moisture-rich and outdoor applications, one question frequently asked is, if bulkhead lights are acceptable for use in wet environments. The answer is yes! With changes over the years, bulkhead lights have developed a specialization durable enough for installation in wet, damp, or humid areas.
What is a Bulkhead Light?
Bulkhead lights are durable and multi-purpose lighting fixtures normally used in places that have challenging lighting needs such as outdoors, garages, warehouses, and ships. From manufacturing to installation, bulkhead lights are built and designed for the rough and tough providing efficient and robust lighting solutions even in bad weather.
The Wet Location Rating and IP Protection
At the heart of the answer as to whether a bulkhead light can be used in a wet location is the IP (Ingress Protection) rating. This rating tells users the extent to which a particular light is protected from moisture and dust. High IP ratings reduce the chances of water penetrating into the enclosure.
The minimum requirement for these types of fittings for wet locations shall be IP65 or higher rating indicating that such lights can withstand exposure to precipitation, splashes or brief immersion. Therefore, these lights can easily be used in outside places, toilets, covered patio, or places of high humidity.
Bulkhead Lights for Wet Locations: Their Benefits
1. Weather Resistance: A wet location bulkhead light with an IP43 or higher rating is a useful appliance since it is impervious to water, rust, and corrosion even in the coastal areas.
2. Safety: Because bulkhead lights are housed in an enclosure, the electrical parts are insulated from moisture which may otherwise lead to short circuits.
3. Durability: There is one feature that makes these lights stand out. They are tough and are manufactured for abuse. Their design allows them to be roughly handled and subject to water all the time.
4. Energy Efficiency: The latest technology applied in modern bulkhead lights is the increased use of LEDs, which serve a dual purpose of providing long-term service together with low energy consumption.
Where to Use Bulkhead Lights in Wet Locations
About Damhead light’s installation, they are best fitted in:
- Outdoor Areas: The places or areas such as porches, staircases and even walkways areas that are most likely to be exposed to outdoor elements on frequent basis.
- Bathrooms: Has been certified as safe for use in areas like bathrooms which is usually humid or with high levels of steam.
- Marine Environments: Suitable for application on boats, docks and piers which are subject to moisture on constant basis.
- Industrial Locations: Applicable in areas such as confusion warehouse, factories or commercial sites with wet conditions.
Last but not the least, bulkhead lights, in this case, can be installed in wet areas as long as the light fittings have a compliant water resistant ip rating. For such wet or damp environments where lightening structure is desired, bulkhead lights does the job perfectly thanks to its efficiency, durability and energy saving features. It is recommendable that consumers should choose high ip rated products so as to have optimal performance and lifespan.
If you would want to get additional information concerning our bulkhead lights, please contact us today and make a choice that suits your needs perfectly.